Elevation Pace Calculator: Predict Your Finish Time on a Hilly Course

Elevation Pace Calculator

How long will a hilly race take you? Enter your flat-road pace and the course elevation, and get your predicted finish time, with the uphill, downhill and flat sections worked out for you.

Your race

The pace you would hold on a flat course
Total climbing, from the race website or Strava
Leave empty for a loop course
Sets how steep the climbs are
Please enter your flat pace (like 5:30) and the elevation gain.

How the calculator works

Hills don’t just slow you down on the way up. You win some time back on the way down, but never all of it. The calculator splits your race into uphill, downhill and flat sections, then adjusts your pace on each one:

  • Uphill: about 3.3% slower per 1% of grade, and more on steep climbs above 8%, where most runners start power-hiking.
  • Downhill: about 1.8% faster per 1% of grade, up to around 6%. Steeper than that, braking eats the benefit, and very steep descents (15%+) slow you down.
  • Flat: your normal pace.

The course type sets the typical steepness of the climbs. On the same total elevation, a few steep climbs cost more than many gentle ones. If the climbing is too much for the distance at that steepness, the calculator steepens the grade automatically.

How accurate is it?

For road races, expect the prediction to land within 2–4% of your real time. On trails, technical ground, heat and altitude add extra time the calculator can’t see, so treat the result as a minimum and add 5–10% on rough terrain.

Rule of thumb

On a hilly road course, every 100 m of climbing (about 330 ft) on a loop costs most runners about 45 seconds to 1 minute compared with a flat course. On trails it is usually 2 to 3 minutes, because the climbs are steeper.

Scroll to Top